MILWAUKEE IMPACT WOOD AUGER BITS – LONG SERIES

Brief overview of the Milwaukee Impact Wood Auger Bits – Long Series:

• Suitable for use with all types of corded / cordless drills including impact wrenches.
• Drilling with an impact wrench enables drilling holes with less effort, one hand drilling, drilling up a ladder and above head height with less risk of injury from the tool clutching out.
• Special zone hardening process ensures an extra hard shank, durable tip and perfectly flexible bit body.
• New MILWAUKEE® Through-Center head geometry with the lead cutting edge lines up with the center of the feed screw – this ensures efficient chip removal and allows for continuous feeding.
• 20° rake angle of the lead cutting edge creates a path for easy chip ejection.
• Polished and powder coated flute design produces a non-stick surface for increased chip ejection, reduced chip clogging and higher selfeeding capability.
• Milling marks are removed in the finishing process, creating a smooth surface.
• Lewis flute with large, wide throat design for rapid chip removal.
• Sharp ground cutting lips for smooth clean holes.
• Resharpenable cutting lips.
• With ⁷⁄₁₆″ shank – to fit square drive ½″ impact wrenches the adaptor 48660061 is required.
• Suitable for hard & soft wood, wet & treated wood, plywood, chipboard, WPC (wood plastic composite), laminated beams and panels, exotic and hard woods e.g. bongossi, iroko, teak, beech, oak, etc.

Features We Like

• Suitable for use with all types of corded / cordless drills including impact wrenches.
• Drilling with an impact wrench enables drilling holes with less effort, one hand drilling, drilling up a ladder and above head height with less risk o
• Special zone hardening process ensures an extra hard shank, durable tip and perfectly flexible bit body.
• New MILWAUKEE® Through-Center head geometry with the lead cutting edge lines up with the center of the feed screw – this ensures efficient chip remova
• 20° rake angle of the lead cutting edge creates a path for easy chip ejection.
• Polished and powder coated flute design produces a non-stick surface for increased chip ejection, reduced chip clogging and higher selfeeding capabili
• Milling marks are removed in the finishing process, creating a smooth surface.
• Lewis flute with large, wide throat design for rapid chip removal.
• Sharp ground cutting lips for smooth clean holes.
• Resharpenable cutting lips.
• With 7/16˝ shank – to fit square drive ½˝ impact wrenches the adaptor 48660061 is required.
• Suitable for hard & soft wood, wet & treated wood, plywood, chipboard, WPC (wood plastic composite), laminated beams and panels, exotic and hard woods

Model Specifications

Wood Drill ShW Auger Bit 14x460mm-1pc

Wood Drill ShW Auger Bit 16x460mm-1pc

Wood Drill ShW Auger Bit 18x460mm-1pc

Wood Drill ShW Auger Bit 19x460mm-1pc

Wood Drill ShW Auger Bit 20x460mm-1pc

Wood Drill ShW Auger Bit 22x460mm-1pc

Wood Drill ShW Auger Bit 26x460mm-1pc

Wood Drill ShW Auger Bit 29x460mm-1pc