Stihl Rapid Micro Harvester Special 50ft Chain Reel

RMHS chain is a standard-profile, semi-chisel chain made to withstand the tough requirements of professional mechanized timber harvesting – with up to 70% longer service life than conventional harvester chains. The drive links, tie straps, cutters and rivets have all been reinforced considerably. This chain is designed to last longer than competing chains to minimize expensive harvester downtime. It is a highly durable harvester chain.

• Before using STIHL Harvester Saw Chain for the first time on your harvester machine, read this.
• Applications: RMHS saw chain is designed for use on hydraulic heads only.
• STIHL recommends using low-kickback, green-labelled chains and reduced-kickback bars on all powerheads.

Unsure which type of saw chain you need? Download our Saw Chain Selection & Identification Chart for easy reference when replacing your STIHL saw chain.

SAW CHAIN GAUGE 0.080″
.404″ Pitch – Part #3620

Features

Cutter Links

Semi-chisel with slim, straight sided cutter.

Drive Links

The drive links are reinforced around the rivet holes (A).
The part of the drive link (B) which runs in the guide bar groove is recessed thickness of the drive link equals 0.080”.

Cutter Heels

Patented, asymmetrically shaped cutter heels enlarge the running face. This considerably reduces the pressure on the cutter and extends the service life.

Tie Straps

Asymmetrically shaped running faces increase the wear surface. This considerably reduces the pressure on the tie straps and extends the service life of the chain.

STIHL OILOMATIC® System

The patented OILOMATIC® system on STIHL saw chains is an exclusive selling feature. This is a specially engineered groove designed to channel oil to critical wear areas. This superior lubrication feature gives the customer extended chain life with a lowered tendency for stretching.

Further development of the OILOMATIC® system is the oil reservoir next to the OILOMATIC® channel. When the drive links pass the guide bar’s inlet hole, these reservoirs fill up with oil and are emptied by the centrifugal force acting at the bar nose. This provides more oil for distribution to the chain, groove and rails and protects against premature wear. Simply put, it brings the oil to where it is needed. Available on all STIHL saw chains.