Makita DUA301 Twin 18V LXT Cordless Pole Saw – 12 inch
- Telescopic design provides high reach over 4m
- Torque Boost Mode maximises output to power through thicker branches
- Chain speed of 20m/s for fast smooth cutting
- Integrated branch hook to easily remove cut branches
- Slim saw head design for improved manoeuverability
Cordless Pole Saw
Makita DUA301 Twin 18V LXT Cordless Pole Saw
- High power BL motor delivers the same or higher operation efficiency than 30 mL class engine models
- The chain speed is the same or higher than competing models, enabling comfortable cutting
- Torque boost mode raises the current limit temporarily for easy cutting of trunks or thick limbs
- Lightweight pole saw head for easy access to a desired cutting position and reduced operator fatigue
- Active Feedback sensing Technology (AFT) turns the motor off if rotation speed suddenly slows
- The same slim design as engine pole saws provides easy maneuverability into branches
- Telescopic extension pole adjustable in length from 2.5m to 3.8m provides extended reach
- Ideal for pruning and limbing in tall trees or hard-to-reach areas
- Two 18V LXT Li-Ion batteries deliver power and performance without leaving the 18V LXT platform
- Anti-fall captive nut to minimize loss of nuts when replacing guide bar or saw chain
- Retractable oil tank cap knob decreases the chance that the saw head will be snagged in branches
- Chain oil tank with high transparency allows to easily check the amount of remaining oil
- Integrated branch hook convenient for removing cut branches from trees
- Battery guard also can be used as an auxiliary grip
- Extreme Protection Technology (XPT) engineered to provide increased dust and water resistance
- Cordless for reduced maintenance; no need to change engine oil or spark plug, clean air filter or drain fuel for storage
- Instant start-up: simply load two 18V LXT batteries and the saw is ready to use
- Battery protection circuit protects against overloading, over-discharging and over-heating
Specs
Power output | 1,000W / 1,400W |
Oil tank capacity | 160mL |
Extendable length | 2.8-3.8m |
Bar length | 300mm |
Chain type | 0.43 x 3/8 |
Blade length | 300mm |
Overall dimensions | 2,826mm |
Net weight | 7.8 – 8.5kg |
Voltage | 36V |
LXT battery compatibility | 2Ah
3Ah 4Ah 5Ah 6Ah |
Guide Bar Length :
300 mm (12″) | |
Effective Cutting Length :
296 mm (11-5/8″) | |
Recommended Guide Bar Length :
250 – 300 mm (10 – 12″) | |
Max Cutting Length :
300 mm (12″) | |
Saw chain :
Gauge: 1.1 / 1.3 mm (0.043 / 0.050″) | |||
|
---|
Chain Speed :
0 – 20.0 m/s (0 – 1,200 m/min) (0 – 3,940 FPM) | |
Oil Tank Capacity :
160 mL | |
Dimensions (L x W x H) :
w/o Guide Bar: 2,530 – 3,762 x 155 x 191 mm (99-1/2 – 148 x 6-1/8 x 7-1/2″) | |||
|
---|
Net weight :
7.8 – 8.5 kg (17.2 – 18.7 lbs.)
Standard Accessories:
Saw Chain, Guide Bar, Guide Bar Case, Blade Cover, Wrench, Band Assembly, Hex Wrench, Battery, Charger, Round File (country-specific), Chain Edger Set (country-specific), Chain Oil (country-specific)
Available options
skin, tool only
supplied with 2x 5.0Ah batteries (BL1850B) & Dual Rapid charger (DC18RD)
Included accessories
Chain (191H01-8), Guide Bar 12″ (165245-8), Chain Cover (419288-5), Wrench 13-16 (782023-7), chainsaw file & Guide 4.5mm (195923-6), Oil Vessel, Hex Wrench 4 (783202-0), Cap 28 and 24, Shoulder Harness (191K37-5)
Optional accessories
Shoulder Harness (196129-9)
Replacement 12″ Chain .043 3/8″*” (191H01-8)
Sprocket Guide Bar 12″ (165245-8)
Oil Pump Complete (140U04-7)
Spring (231975-4)
Chain Cover (419288-5)