Makita DUN461W 18V LXT Cordless Long Reach Hedge Trimmer – 18 inch

Makita DUN461W 18V LXT Cordless Long Reach Hedge Trimmer – 18 inch – 46 cm Pole Hedge Trimmer

• Trim tall hedges or prune the twigs or thin branches of tall trees without using stepladder
• High cutting speed enables smooth and efficient trimming
• Low noise level similar or lower than that of the competitors
• 3,600 SPM for faster cutting
• Telescopic pipe for no need of stepladders
• New chip receiver can make it easier for user to collect leaf and twig debris, thanks to lower height of the connecting hooks and reduced step height of the edge of the chip catching plate
• Lock lever for tool-less easy adjustment of pole extension
• Slide-type front grip grip position is adjustable for personal fit and comfort maximum work efficiency in different working postures
• Angle adjustable hedge trimmer head; 60° tilt-up to 75° tilt-down from the horizontal position; Can be folded in the 180° position for easy transport and storage; Built-in clutch works to stop the blade motion even if the throttle lever is touched during folding operation; 10 angle settings; The angle of hedge trimmer head can be changed simply by pushing a button
• Reverse rotation system frees the blade when it is jammed by thick branches
• Lock-off button accessible from both sides
• Single-speed switch
• Battery guard
• Battery protection circuit protects against overloading, over-discharging and over-heating
• Cordless for instant start-up, zero emissions and reduced maintenance
• Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions

Specs

Blade Length :

460 mm (18-1/8″)

Tooth Spacing :

28 mm (1-1/8″)

Max Cutting Capacity:

18 mm (11/16″)

Strokes Per Minute (SPM) :

3,600

Continuous Use (min.):

w/ BL1850B: 122

Max Output:

250 W

Sound Pressure Level :

74 dB(A)

Noise K Factor:

3 dB(A)

Vibration Level:

Front / Rear: 2.5 m/s² / 2.5 m/s² or less

Vibration K Factor:

1.5 m/s²

Dimensions (L x W x H):

1,889 – 2,511 x 87 x 134 mm (74-1/2 – 99 x 3-7/16 x 5-1/4″)

Net weight:

3.0 – 3.3 kg (6.6 – 7.3 lbs.)

Standard Accessories:

Blade Cover, Chip Receiver (country-specific), Shear Blade (country-specific), Battery, Charger

• 
• 

Downloads

Part Diagrams

User Manual

Alternative User Manual

Leaflet

Product Sheet